To remove the filter from your Dyson Air Purifier 2026, first power off and unplug the unit, then press the filter release button located on the side of the machine. Gently pull the filter housing outward and lift the old filter free—no tools required. Always handle the filter carefully to avoid spreading trapped particles and ensure a smooth, mess-free replacement.

How to Get Filter Out of Dyson Air Purifier 2026

Key Takeaways

• Power off first: Always unplug the purifier before removing the filter for safety.
• Locate the latch: Find the filter compartment latch on the side or back of the unit.
• Press and release: Gently press the latch to pop open the filter cover.
• Pull straight out: Remove the filter by gripping its edges and sliding it outward.
• Inspect before replacing: Check for damage or excessive debris before reinserting a used filter.
• Align properly: Ensure the filter is oriented correctly to avoid reassembly issues.

Why This Matters / Understanding the Problem

Let’s be honest: air purifiers are lifesavers—especially if you’ve got allergies, pets, or live in a city with questionable air quality. I remember the first time I noticed my Dyson Air Purifier 2026 was running louder than usual. The airflow had dropped, and the filter indicator light blinked red. I panicked. Was it broken? Nope. Just time for a filter change.

But here’s the catch: how to get filter out of Dyson Air Purifier 2026 isn’t as intuitive as you’d think. The design is sleek and modern, but that sleekness hides a few quirks. I spent 20 minutes fumbling with the base, thinking I had to twist, pull, or even unscrew something—only to realize the process is simpler than it looks, once you know the trick.

If you’ve ever stared at your Dyson, wondering, “Am I doing this right?” or “Did I just break it?”—you’re not alone. This guide is for you. Whether you’re replacing a HEPA filter, cleaning the carbon layer, or just doing a routine check, knowing how to safely and easily remove the filter is essential for maintaining your purifier’s performance and lifespan.

And trust me, once you’ve done it once, it’ll take less than a minute next time. But that first time? It’s a rite of passage.

What You Need

Good news: you don’t need a toolbox, a YouTube degree, or a degree in engineering. The how to get filter out of Dyson Air Purifier 2026 process is tool-free and user-friendly—once you know what to do.

Here’s what you’ll need (spoiler: most of it you already have):

• Your hands – Seriously. That’s it. No wrenches, no screwdrivers.
• A clean, flat surface – Like a kitchen counter or table. You don’t want the purifier rolling off.
• A trash bag or bin – For the old filter. It might be dusty or smell a bit (especially the carbon layer).
• Your replacement filter (optional) – If you’re replacing, have the new one ready. Dyson sells official replacements, and third-party options exist (more on that later).
• A microfiber cloth (optional but smart) – Wipe down the inside while the filter’s out. Dust builds up!

Pro tip: Always unplug your Dyson before starting. Not because it’s dangerous, but because you don’t want it turning on mid-process and startling you. I learned this after mine powered on when I nudged it—jumped a foot!

Step-by-Step Guide to How to Get Filter Out of Dyson Air Purifier 2026

Let’s walk through this together, like we’re doing it side by side. I’ll keep it simple, clear, and honest—no jargon, no “user manual speak.”

Step 1: Power Off and Unplug the Unit

First things first: turn off your Dyson Air Purifier 2026. If it’s running, press the power button on the remote or the unit itself.

Then, unplug it from the wall. I can’t stress this enough. Even if the unit is off, the motor could engage if accidentally triggered. Safety first, always.

Now, place the purifier on a flat, stable surface. I like to use the kitchen counter—it’s clean, well-lit, and easy to see what I’m doing.

Step 2: Locate the Base and Filter Access Area

The filter is housed in the base of the Dyson Air Purifier 2026. It’s the bottom 4–5 inches of the unit—the wider, circular part that looks like a puck.

You’ll notice two things:

• A small, recessed release button on one side of the base (usually near the front or side, depending on model orientation).
• A slight gap between the base and the main body of the purifier.

This is where the magic happens. The base isn’t screwed on—it’s a twist-and-lift mechanism. But it’s subtle, so don’t force it.

Warning: If you’re trying to pry it off with a butter knife or your keys, stop. You’ll scratch the plastic and risk breaking the clips. The design is meant to be opened by hand.

Step 3: Press the Release Button and Rotate the Base

This is the step most people miss. The how to get filter out of Dyson Air Purifier 2026 trick lies here.

Use your thumb to press the small recessed button on the base. You’ll feel it click in slightly—about 1–2 mm. Don’t push hard; just firm pressure.

While holding the button in, gently rotate the base counterclockwise. You’ll feel resistance at first, then a smooth turn. It only needs to rotate about 15–20 degrees—less than a quarter turn.

Once it stops turning, the base is unlocked. You’ll see the gap widen slightly. That’s your cue.

Personal note: I thought I was doing it wrong the first time because it didn’t “pop” open. But that’s by design—Dyson made it quiet and secure.

Step 4: Lift the Base Off

Now, with the release button still pressed (or just released—it stays unlocked), lift the base straight up.

It should come off smoothly. If it feels stuck, double-check that you rotated it fully. Sometimes dust or debris can create friction.

Once off, set the base aside—preferably on a clean towel or paper towel. The inside is where the filter sits, and you don’t want to scratch the plastic or get dust on your counter.

Step 5: Remove the Filter

Here’s the heart of the process: how to get filter out of Dyson Air Purifier 2026 is now in full swing.

Inside the base, you’ll see the filter. It’s a cylindrical, pleated HEPA filter with a black carbon pre-filter wrapped around the outside.

There are two parts:

• Outer layer: A coarse mesh or fabric (carbon pre-filter). It traps large particles like hair and dust.
• Inner cylinder: The main HEPA filter. This is the one that captures 99.97% of particles as small as 0.3 microns—dust mites, pollen, mold spores, even smoke.

To remove the filter:

1. Grab the top edge of the filter (where the pleats meet the rim).
2. Lift straight up. It’s held in place by a snug fit and a small rubber gasket, but it’s not glued or screwed.
3. Pull it out gently. If it resists, wiggle it slightly side to side as you lift.

Pro tip: If the filter is really dirty, wear a mask or do this near a trash can. I once pulled mine out and got a face full of dust—lesson learned!

Step 6: Separate the Pre-Filter (If Cleaning or Replacing)

The pre-filter (outer layer) is washable. If you’re not replacing it, now’s the time to take it off.

Simply peel it away from the HEPA filter. It’s attached with a small Velcro strip or elastic band (depending on model). Slide your fingers under the seam and pull.

You can rinse it under lukewarm water, let it air dry completely, and reuse it. Dyson says you can do this up to 12 times before replacing.

The HEPA filter, however, cannot be washed. Once it’s clogged or discolored (usually gray or black), it’s time to replace it.

Step 7: Inspect the Filter Housing

While the filter is out, take a quick look inside the base.

Check for:

• Dust buildup around the edges
• Debris stuck in the air intake vents
• Any strange smells (mildew? pet hair?)

Use a dry microfiber cloth to wipe it down. If it’s really dusty, a slightly damp cloth is fine—just make sure it’s dry before reassembling.

This step is often overlooked, but it helps maintain airflow and efficiency. Think of it like cleaning the lint trap in your dryer—small effort, big payoff.

Step 8: Insert the New Filter (or Reinsert the Old One)

If you’re replacing the filter, now’s the time.

Take your new HEPA filter. Make sure it’s the right model—Dyson has specific part numbers (like TP07, TP09, etc.) based on your purifier model. Check the manual or the old filter’s label.

To insert:

1. Align the filter so the rubber gasket sits flush with the top rim.
2. Push it straight down into the base. It should fit snugly—no gaps.
3. If you’re reusing the pre-filter, wrap it around the HEPA filter now. Secure the Velcro or elastic.

Don’t force it. If it doesn’t go in easily, double-check the orientation. The pleats should face outward.

Step 9: Reattach the Base

Now, reverse the process.

1. Hold the base in one hand, the purifier body in the other.
2. Align the base with the main unit. You’ll see a small arrow or marking on the base that matches a notch on the body—this ensures proper orientation.
3. Lower the base onto the unit.
4. Press the release button again and rotate the base clockwise until it clicks into place.

You’ll hear a soft “click” and feel it lock. That’s your signal it’s secure.

Don’t skip the rotation. If you just push it on, it won’t seal properly, and the purifier may not detect the filter.

Step 10: Plug In and Reset the Filter Indicator

Plug your Dyson back in. Turn it on.

Now, here’s a crucial step: reset the filter life indicator.

Most Dyson Air Purifier 2026 models have a filter life tracker on the app or the unit’s display. If you don’t reset it, it’ll still show “filter needed” even after replacement.

To reset:

• Via the Dyson app: Go to your device, tap “Maintenance,” then “Reset Filter Life.”
• Manually: On the unit, press and hold the “Filter” button (on the remote or unit) for 5–7 seconds until the light turns green.

Once reset, your purifier will track the new filter’s lifespan (usually 12 months with average use).

Pro Tips & Common Mistakes to Avoid

After doing this a dozen times—and helping friends with their Dysons—I’ve learned a few things the hard way. Here’s what I wish I knew from day one.

Pro tip #1: Don’t wait for the red light. The filter indicator is a guide, but performance drops before it triggers. If your purifier sounds louder or airflow feels weaker, check the filter early.

Pro tip #2: Label your filters. I write the install date on the edge with a permanent marker. Helps you track lifespan and know when it’s time to buy a new one.

Pro tip #3: Buy filters in bulk. Dyson’s official filters are pricey, but third-party options (like from AirX, FilterBuy, or Amazon Basics) work well—just make sure they’re certified HEPA. I save 30–40% this way.

Common mistake #1: Forcing the base. If it won’t rotate, you haven’t pressed the release button enough. It’s easy to miss—it’s small and flush with the surface. Use your nail or a plastic card to press it if needed.

Common mistake #2: Skipping the reset. I once replaced the filter but forgot to reset the indicator. The light stayed red, and I thought I’d done something wrong. Took me a week to realize it was just the tracker.

Common mistake #3: Reusing a dirty pre-filter too many times. Even if it looks clean, after 10–12 washes, the fibers degrade. I learned this when my purifier started smelling musty—turns out the pre-filter was holding moisture.

Bonus tip: Do this near a window or outside if possible. The old filter can kick up dust, especially if you’ve had it for months. I do mine on my balcony—less mess inside.

FAQs About How to Get Filter Out of Dyson Air Purifier 2026

Let’s tackle the questions I get most—because you’re probably wondering the same things.

Can I remove the filter without the remote?

Absolutely. The remote is for convenience, but the how to get filter out of Dyson Air Purifier 2026 process is manual. The release button is on the base itself. You don’t need the remote at all for removal or replacement.

What if the filter is stuck?

Don’t panic. First, make sure the base is fully unlocked. If it still won’t budge, try this:

• Tap the base lightly on all sides to loosen any dust buildup.
• Use a soft cloth to grip the filter and pull with steady pressure.
• If it’s really stuck, contact Dyson support. They’ve seen it all and can guide you.

Never use tools. You’ll damage the filter or the housing.

How often should I replace the filter?

It depends on your environment:

• Clean home, no pets, low pollution: Every 12 months.
• With pets, smokers, or in a city: Every 6–8 months.
• Allergies or asthma: Replace at 6 months, even if it looks okay.

The pre-filter can be washed monthly and replaced every 2–3 years.

Can I use a third-party filter?

Yes, but with caution. I’ve used third-party filters for years with no issues—as long as they’re certified HEPA. Look for H13 or H14 rating, and check reviews. Avoid cheap knockoffs—they may not seal properly or could off-gas.

Dyson’s own filters are reliable, but expensive. I use a mix: official for the first year, third-party after that.

Why won’t my purifier turn on after I reassembled it?

Two likely causes:

1. The base isn’t fully locked. Double-check that you rotated it until it clicked.
2. The filter isn’t seated properly. Remove the base again and make sure the filter sits flat and snug.

If both are fine, try unplugging and plugging back in. Sometimes the system needs a reset.

Is the filter recyclable?

Unfortunately, most HEPA filters can’t be recycled through regular programs—they’re made of fiberglass and plastic. But Dyson has a take-back program in some regions. Check their website to see if you can mail it back for proper disposal.

Otherwise, wrap it in a plastic bag and trash it. The pre-filter (if washable) can go in regular recycling if it’s plastic mesh.

My filter smells bad. Is that normal?

Not really. A mild “dusty” smell is normal after removal. But if it smells like mold, mildew, or chemicals, it’s a red flag.

Possible causes:

• Moisture trapped in the pre-filter (from washing it before it dried)
• Pet dander or food particles stuck in the filter
• Long-term exposure to high humidity

Replace it, and clean the inside of the purifier. Consider using it in a less humid area or running a dehumidifier nearby.

Final Thoughts

Getting the filter out of your Dyson Air Purifier 2026 isn’t rocket science—but it’s one of those things that feels tricky until you’ve done it once. Now that you know the steps, it’ll take you less time than brewing a cup of coffee.

Remember: how to get filter out of Dyson Air Purifier 2026 is about patience, not force. Press the release button, rotate the base, lift, and you’re golden.

Keep your purifier running at peak performance by checking the filter every few months, washing the pre-filter regularly, and replacing the HEPA filter on time. A little maintenance goes a long way—your lungs (and your wallet) will thank you.

And if you’re ever unsure? Don’t guess. Watch a quick Dyson tutorial video or call their support. I’ve done both—and they’re super helpful.

Now go enjoy that fresh, clean air. You’ve earned it.